Fermentation of starch hydrolysates byLactobacillus plantarum

Summary Lactic acid production by an isolated ofLactobacillus plantarum was standardised on enzyme-hydrolysed tapioca (Manihot esculenta) flour, tapioca starch and soluble starch. Calculated yields of lactic acid (g from 100 g reducing sugars used) in nutrient media containing the abovementioned hydrolysates (10% reducing sugars) were 21.8%, 16.2% and 16.2%, respectively. Higher yields (29–34%) were obtained in media containing 5% reducing sugars. A conversion efficiency of 80–99% was achieved when the acid produced in the broth was neutralised periodically. One hundred milliliters of the medium (5% sugars) yielded 4.0–4.5 g of calcium lactate. These results indicate that unrefined starchy material can be successfully employed for the economic production of lactic acid. The same substrate can also be utilised for biomass production, as viable lactobacilli are being used for therapy in medicine.     

Purification and properties of the coenzyme A-linked acetaldehyde dehydrogenase of Acetobacterium woodii

Coenzyme A-linked acetaldehyde dehydrogenase (ACDH) of ethanol-grown cells of Acetobacterium woodii was purified to apparent homogeneity; a 28-fold purification was achieved with 13% yield. The enzyme proved to be oxygen-sensitive and was inactive in the absence of dithioerythritol. During the purification procedure addition of 1 mM MgCl₂ was necessary to maintain enzyme activity. Alcohol dehydrogenase (ADH) activity was separated from ACDH during anion exchange chromatography using DEAE Sephacel. A part of the ACDH activity coeluted with ADH, but both could be separately eluted from a Cibacron Blue 3GA-Agarose column, revealing the same subunit structure and activity band for ACDH as found before and, thus, indicating an aggregation of the enzyme. The remaining ADH activity could be separated by gel filtration. For the native ACDH a molecular mass of 255 kDa was determined by polyacrylamide gel electrophoresis and of 272 kDa by gel filtration using Superose 12. The enzyme subunit sizes were 28 kDa and 40 kDa, respectively, indicating a ₄₄ structure for the active form. The enzyme catalyzed the oxidation of several straight chain aldehydes although it was most active with acetaldehyde. NADH strongly inhibited oxidation of acetaldehyde whereas NADPH had no effect. The inhibition was noncompetitive.Non-standard abbrevations ACDH acetaldehyde dehydrogenase - ADH alcohol dehydrogenase - CHES 2-(N-cyclohexylamino)-ethanesulfonate - DTE dithioerythritol - KP-buffer 25 mM K-PO₄, pH 7.5, containing, 4 mM DTE - MES 2-(N-morpholino)-ethanesulfonate - TAPS N-Tris-(hydroxymethyl)-methyl-3-aminopropa-nesulfonate     

Clostridium neopropionicum sp. nov., a strict anaerobic bacterium fermenting ethanol to propionate through acrylate pathway

Strain X4 was isolated several years ago from an anaerobic mesophilic plant treating vegetable cannery waste waters. It was the first example of propionic fermentation from ethanol. Morphologic and physiologic characterizations of the strain are presented here. This strain is described as type strain of a new species, Clostridium neopropionicum sp. nov. Whole cells of strain X4 ferment [1-¹³C]ethanol and CO₂ to [2-¹³C]propionate, [1-¹³C]acetate and [2-¹³C]propanol, suggesting the absence of a randomizing pathway during the propionate formation. Enzymes involved in this fermentation were assayed in cell-free extracts of cells grown with ethanol as sole substrate. Alcohol dehydrogenase, aldehyde dehydrogenase, phosphate acetyl transferase, acetate kinase, pyruvate synthase, lactate dehydrogenases, and the enzymes of the acrylate pathway were detected at activities sufficient to be involved in ethanol fermentation. The same pathway may be used for the degradation of lactate or acrylate to acetate.     

The disposition of venlafaxine enantiomers in dogs, rats, and humans receiving venlafaxine.

A stereospecific high-performance liquid chromatographic (HPLC) method was developed for the quantitation of the enantiomers of venlafaxine, an antidepressant, in dog, rat, and human plasma. The procedure involves derivatization of venlafaxine with the chiral reagent, (+)-S-naproxen chloride, and a postderivatization procedure. The method was linear in the range of 50 to 5,000 ng of each enantiomer per ml of plasma. No interference by endogenous substances or known metabolites of venlafaxine occurred. Studies to characterize the disposition of the enantiomers of venlafaxine were conducted in dog, rat, and human, following oral administration of venlafaxine. The Cmax, area under the curve (AUC) and (S)/(R) concentration ratios of the (R)- and (S)-enantiomers were compared. In rats, the mean plasma ratio of (S)-venlafaxine to that of (R)-venlafaxine over 0.5 to 6.0 h varied from 2.97 to 8.50 with a mean value of 5.51 +/- 2.45. The Cmax, AUC0-infinity, and t 1/2 values of the (R)- and (S)-enantiomers in dogs were not significantly different from one another (P greater than 0.1). The mean ratios [(S)/(R)] of enantiomers of venlafaxine in human over a 2 to 6 h interval ranged from 1.33 to 1.35 with an overall ratio of 1.34 +/- 0.26 (n = 12). These ratios of the enantiomers [(S)/(R)] were not statistically different from unity (P greater than 0.1) indicating that the disposition of venlafaxine enantiomers in humans is not stereoselective and is more similar to that in dogs than that in rats.     

Resolution and stability of oxazepam enantiomers

A solvent mixture containing dioxane, acetonitrile, and hexane was found to be suitable as a mobile phase to resolve oxazepam enantiomers by chiral stationary phase high performance liquid chromatography using covalent Pirkle columns. The resolved oxazepam enantiomers in this solvent mixture had a racemization half-life greater than 3 days at 23°C. When desiccated at 0°C as dried residue, OX enantiomers were stable for at least 50 days with less than 2% racemization. The conditions which stabilized OX enantiomers significantly facilitated the determination of racemization half-lives of OX enantiomers in a variety of aqueous and nonaqueous solvents and at different temperatures. © 1992 Wiley-Liss, Inc.     

A method for estimating oxygen availability of stationary plant cell cultures in liquid media

A method for estimating the oxygen availability in plant cell cultures grown in stationary liquid media (e.g. many protoplast cultures) was developed. The method is based on short-term measurements of respiration rate versus oxygen concentration on a sample of cells, suspended in liquid media. From such data it is possible to estimate the oxygen concentration at the bottom of a stagnant liquid culture, by calculating the amount of oxygen reaching the cells by diffusion. As an example, rape (Brassica napus L. cv. Omega) hypocotyl protoplasts were grown with different oxygen concentrations at the site of the cells, obtained by varying the cell density, the height of the liquid layer and the oxygen content of the gas phase. The number of surviving calli was positively correlated with the estimated oxygen availability in the range between 60 and 350 M O₂, below 60 M all cells died. This indicates that oxygen availability can be a limiting factor in the range usually encountered in protoplast cultures, and that the method can be useful when designing optimal growth conditions for stationary cultures of plant cells.Abbreviations C₁ bulk oxygen concentration in agitated medium - C_o oxygen concentration in medium at the gas-liquid interface, in equilibrium with the gas - C_x oxygen concentration at cell level - D diffusion constant of oxygen in water - K_La oxygen transfer rate - l height of liquid above cells - n number of cells per ml - R_x respiration rate per cell     

Culture of Amelanchier x grandiflora in a programmable micropropagation apparatus

A micropropagation system was developed to test concepts for automation and microenvironment alteration. Amelanchier x grandiflora Rehd. Princess Diana (serviceberry) shoot cultures were grown in seven-liter polycarbonate containers. Through computer control, the apparatus intermittently applied culture medium to the plant material according to a selected schedule. Shoot growth in the programmable system was compared with four micropropagation treatments: gelled and liquid medium in baby food jars and gelled and non-cycling liquid medium in a seven-liter vessel. Plants cultured in continuous contact with liquid medium became increasingly vitrified. Significantly greater shoot number, shoot length, shoot weight, and culture weight occurred in the programmable system than in jars with gelled medium. The combination of liquid medium, 7-liter vessel, and intermittent contact with medium caused a significantly higher proliferation rate than any combination of jar/vessel and gelled/liquid medium tested.     

Identification of two novel amyloid A protein subsets coexisting in an individual patient of AA-amyloidosis

Amyloid A protein (AA), the major fibril protein in AA-amyloidosis, is an N-terminal cleavage product of the precursor protein, serum amyloid A (SAA). Using mass spectrometry and amino-acid sequencing, we identified and characterized two novel AA protein subsets co-deposited as amyloid fibrils in an patient having AA-amyloidosis associated with rheumatoid arthritis. One of the AA proteins corresponded to positions 2–76 (or 75) of SAA2α and the other corresponded to positions 2–76 (or 75) of known SAA1 subsets, except for position 52 or 57, where SAA1α has valine and alanine and SAA1β has alanine and valine in position 52 and 57, respectively, whereas the AA protein had alanine at the both positions. Our findings (1), demonstrate that not only one but two SAA subsets could be deposited together as an AA-amyloid in a single individual and (2), support the existence of a novel SAA1 allotype, i.e., SAA1^52,57Ala.     

Calpain II induced insolubilization of lens β-crystallin polypeptides may induce cataract

Addition of calpain II (EC 3.4.22.17) to soluble proteins from 10-day-old rat lens caused an increase in turbidity and production of water-insoluble protein. The insolubilization increased with higher concentrations of both lens protein and calpain II, it could be prevented by the cysteine protease inhibitor E-64; it required at least 0.5 mM Ca²⁺, it was limited to 6% of the soluble protein present and resulted from precipitation β-crystallin polypeptides. When compared by two-dimensional electrophoresis, the insoluble β-crystallin polypeptides produced by calpain II were similar to insoluble β-crystallin polypeptides found incataractous lenses. Trypsin also caused insolubilization of β-crystallin polypeptides, but these polypeptides were unlike polypeptides produced during cataract formation. These data suggested that the loss of solubility was due to a specific removal of N/or C-terminal extensions from β-crystallin polypeptides by calpain II, and that a similar process may occur in vivo during cataract formation. It is hypothesized that the insoluble protein produced by calpain II causes cataract by increasing light scatter in the lens.     

Conformations and dynamics of surfactants in micelles and liquid crystals by nuclear magnetic relaxation

The order parameters as well as the rates of overall and internal motions of aggregated surfactants can be obtained from deuteron and carbon-13 nuclear relaxation experiments. The main contribution to the relaxation is generally the quadrupolar coupling (²H) or the short range dipolar interaction with protons (¹³C). In some cases it is convenient to derive the same information from the¹³C relaxation induced by long range dipolar interactions with a paramagnetic probe exchanging rapidly among the polar heads of surfactant molecules. This paper outlines the methods of interpretation of relaxation data by means of a rotational jump model of internal motions, taking into account most of the accessible conformers. The conformational and dynamical parameters are obtained from the magnetic field dependence of the longitudinal relaxation rates (micelles) or from the simultaneous fit of these rates and of the dipolar or quadrupolar splittings (liquid crystals). Some examples of application of these methods are given from recent works on single and double detailed surfactants.